Spare parts for Vespa, Scooter, Mopeds, Motorcycles
Find spare parts for your Vespa, Scooter, etc.
Reference: DL09006109
Brand: Dell'Orto
Fuel filter for Dellorto SHA-PHBE-PHB-PHF-PHBH-PHBL-PHM carburettor catalog references: 6109 - 29
Reference: DL09011600
Brand: Dell'Orto
DELLORTO carburettor jet ref. Catalog 11600 x 02
Reference: DL09001476
Brand: Dell'Orto
Cable cover for Dellorto carburettor SHA-PHBE-PHB-PHF-PHBH-PHBL-PHBN-PHVA-PHBG-PHBD-PHM-VHSA-VHSB-VHSC-VHSH-VHSD-VHST-VHSG catalog references: 1476 - 06
Reference: DL09012530
Brand: Dell'Orto
Idle emulsifier jet for Dellorto PHBH-PHBL carburettor catalog references: 12530 x 02
Reference: DL09013086
Brand: Dell'Orto
Idle emulsifier jet B for Dellorto carburettor PHBH-PHBL-VHSA-VHSB-VHSC-VHSH catalog reference: 13086 x 02
Reference: DL09052523
Brand: Dell'Orto
Gasket set for DELLORTO PHBH ... AS-AD-BS-BD-GS-IS-LS-US-VS-PS carburettor reference catalog 52523
Reference: DL09012995
Brand: Dell'Orto
Idle jet for Dellorto PHBE-PHB-VHSA-VHSB-VHSC-VHSH carburettor catalog references: 12995 x 02
Banner
Crankcase and spare parts for Vespa with gears: Low lighthouse, V98, V1-33, VM, VN, ACMA, VB1T, VGL1T, VL1T, GS150.
The brands that you can buy in this category : Ariete , Benelli , Champion , Cif , Corteco , Dellorto , Dr , Effe , FA Italia , Ferodo , Mec Eur , Malossi , Mazzucchelli , Michelin, Newfren , Ngk, Olympia , Piaggio , Pinasco , Polini , PLCcorse, Quattrini, Rms, Sip performance, Skf, Surflex , Vmc
There are 7 products.
Reference: PN26482128
Brand: Pinasco
Die-casting molding technology, steel sliding track inserts, locking of the crankcase by means of studs, new gearbox axis bearings, increased crankshaft + 7mm in width compared to the original
Reference: PN26482130
Brand: Pinasco
Crankcase with 4 studs to mount PX thermal units 57mm stroke, die-casting molding technology, steel sliding track inserts, closing of the crankcase by means of studs, new gearbox axle bearings, larger crankshaft + 7mm in width compared to the original
Reference: PN26482129
Brand: Pinasco
Crankcase with 4 studs to mount PX cylinder kits 60mm stroke, die-casting technology, steel sliding track inserts, closing of the crankcase by means of studs, new gearbox axle bearings, larger crankshaft + 7mm in width compared to the original
Reference: RM121860280
Brand: RMS
Cylinder stud M7x35 mm for Vespa 50 / N / L / R / Special / S / SR / SS / 90 / R / SS / 100 / PK50S / XL / XL2 / PK80S cylinder intake for Vespa 125 VN1-2 / VM1-2 / 150 VL1-3 / VB1
Reference: RM121858690
Brand: RMS
Stud engine casing M7x49 mm steel 8.8 black for Vespa 125 V1-TS / 150 VL -Super / 160 GS / 180 SS / Rally / PX80-200 / PE / Lusso / T5 / Cosa, PX (7) PX Lusso / T5 / Cosa
Reference: PN26271453
Brand: Pinasco
The Pinasco SPRINT GEARS gears are complete with shims and are mounted on all Pinasco or Piaggio variator wheel hubs.
